Gasoline Chainsaw Petrol Wood Cutting Machine

Gasoline Chainsaw Petrol Wood Cutting Machine

gasoline chainsaw petrol wood cutting machine is a two-stroke gasoline engine with beautiful appearance, imported power, light weight and convenient use. it is mainly used for excavation with soil ball during forest transplanting. This machine can be cut freely under various harsh environments. it is easy to operate and has a wide range of work. The seedlings under 30 cm can easily take roots and take seedlings at random. The single operation takes only 2~3 minutes, the cutting depth is large and the diameter is larger. It can retain the roots and pot-shaped soil balls of the seedlings to a large extent, without damaging the roots and increasing the survival rate of the seedlings.

Send InquiryChat Now
Product Details

Product details

Model: DY5200

Displacement: 47.9cc

Power: 2.0kw / 8500 (min)

High speed: 13500 r / min

Idle speed: 2800 r / min

Guide length: 18 inches / 45cm

Spark plug brand: NGK spark plug

Net weight: 4.96kg

Product description

gasoline chainsaw petrol wood cutting machine is a two-stroke gasoline engine with beautiful appearance, imported power, light weight and convenient use. it is mainly used for excavation with soil ball during forest transplanting. This machine can be cut freely under various harsh environments. it is easy to operate and has a wide range of work. The seedlings under 30 cm can easily take roots and take seedlings at random. The single operation takes only 2~3 minutes, the cutting depth is large and the diameter is larger. It can retain the roots and pot-shaped soil balls of the seedlings to a large extent, without damaging the roots and increasing the survival rate of the seedlings.

Product show

gasoline-chain-saw-wooden-cutting-machine08547983386

Product Disassembly tips

The structure of the chain saw and the felling saw is relatively simple, and it is convenient to disassemble and disassemble.

1. Most parts of the chain saw are magnesium alloy products. It is strictly forbidden to hit with a hammer when disassembling. The fasteners should not be tightened too tightly to prevent the thread from being buckled.

2. When removing the piston ring, do not make the opening too large to avoid deformation or breakage.

3. When assembling the piston, pay attention to the piston ring groove orientation pin facing away from the exhaust port

4. When assembling the cylinder, first put the cylinder gasket on the sleeve, pay attention to the position of the air exchange port, align the piston ring opening with the positioning pin in the ring groove, and then push the piston into the cylinder.

5. Before assembling the crankcase, remove the stain on the joint surface, heat it in the oven or oil to about 120 °C-150 °C, take it for 3 minutes, add the crankcase cushion, and align the positioning pin when combining.

6. Demolition of the flywheel and clutch must use professional tools. After assembly, the assembly quality of the semi-circular keys must be checked.

7. All the through holes of the carburetor should be blown with compressed air or air pump. Do not use wire or other materials to avoid punching the holes and nozzles.

8. When installing the chain saw on the carburetor, pay attention to the direction of the paper pad and the vent hole.

9. Non-contact magneto motor assembly, pay attention to the circuit line docking when wiring, and pay attention to the insulation of the circuit line

More contacts

 

Sonia Wang

Tel:0411-88530539

Fax:0411-88530539

Mobile:13610917420

E-mail:wangyong@dl-jnw.com

Skype:yong1993420

Whatapp:+8613610917420

imo:+8613610917420

 


 

Hot Tags: gasoline chainsaw petrol wood cutting machine, China, suppliers, manufacturers, factory, wholesale, buy, price, quotation, in stock, made in China
Inquiry